Operation Manual

Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
22
ELECTRIC
MOBILITY
Brake Release Lever
The 140T/140F features a “push mode” to allow it to be pushed by hand . To activate manually, turn the key switch OFF
and locate the brake release lever on the right side of the rear cover. The Brake Release Lever is shown in Figure 11.
Push lever towards front of vehicle, “PUSH MODE” position, to disengage the brake. Move lever back towards rear of
vehicle, “DRIVE” position, to reengage the brake. When your vehicle is in “push mode”, brakes will not operate.
WARNING!
Never sit in vehicle if it is in “PUSH MODE” on an incline.
Figure 11 - Brake Release Lever and Overload Fuse
OVERLOAD FUSE
BRAKE RELEASE
LEVER