Operation Manual

Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
20
ELECTRIC
MOBILITY
Driving
Once seated on your vehicle, driving is as simple as using the Engager Levers to move forward (right lever) or reverse (left
lever) and steering in the desired direction. Before driving, however, you should keep in mind the following
recommendations.
•Handlebar assembly is adjusted to comfortable riding position.
•Motor is engaged. Check Brake Lever. Should be in “DRIVE” position. See Figure 11, page 22.
• Armrests are locked into driving position.
•Handlebar Assembly Lock is in the unlocked position.
WARNING!
If any of these items are questionable, DO NOT OPERATE! Check before driving.
Failure to disregard these conditions may cause accidents or injuries.
Speed Settings
The overall forward/reverse speed range of the vehicle is selected from the Speed dial on the dash. Lower settings
(indicated by the turtle symbol) result in slower speeds. Higher settings (indicated by the rabbit symbol) provide faster
speeds. When first operating your vehicle, select slower settings until you feel comfortable.