Operation Manual

Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
10
ELECTRIC
MOBILITY
3. Locate Charger connection on top side of Battery Case
housing. It is covered by a square, hinged door labeled
“Charger.” Battery Case charging connection is shown
in Figure 4.
4. Attach the separate AC line cord into the Charger.
Connect other end to a 3 prong electrical outlet.
There is an LED located on the Charger housing
labeled High Power Tech. The LED will turn red to
indicate charger is ready.
5. Plug the round, 3-prong plug attached to the Charger
into charger connection on Battery Case housing.
6. The Charger LED Indicator on the charger housing
should appear orange while charging. When LED
appears green, Battery is fully charged.
7. If Battery Case was removed from vehicle, replace it
and make sure it is secured in place.
Figure 4 - Battery Case Charger Connection