EM 140T / 140F Owner’s Manual ELECTRIC MOBILITY 1 Mobility Plaza Sewell, NJ 08080
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Thank you for purchasing the Model 140T/140F. With proper care, this vehicle should give you a lifetime of fun and excitement. You will enjoy the freedom to do what you want, when you want, and when you want to. Your satisfaction means everything to us. That’s why we have the best customer service in the industry. Information on our service and warranties are all spelled out in a subsequent section of this manual.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Contents Title Page Safety Information .......................................................................................................................................................................................... 1 Important Information Regarding Electromagnetic Interference (EMI) ......................................................................................... 3 Getting to know your Model 140T/140F ...................................
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY On/Off Key .................................................................................................................................................................. 12 Figure 6 - Key Location ..................................................................................................................................... 12 Forward/Reverse Engager Levers ............................................................................................
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Disassembling Your Model 140T/140F .......................................................................................................................................... 25 Figure 13 - Battery Case Removal ........................................................................................................................................................... 25 Figure 14 - Frame Buckle ...................................................................
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Figures Figure Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Title Page Model 140F Components ................................................................................................................................. 6 Seat Installation ................................................................................................................................................... 8 Battery Charging, Off Vehicle ...............................
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Safety Information Read and understand these Warnings and the entire manual before using your Model 140T/140F Scooter. Failure to follow these instructions may result in damage to the vehicle or serious injury. NOTE: The caster wheels may NOT prevent the scooter from tipping if scooter is used improperly. WARNING! This vehicle is not a medical device and is NOT intended for use by those with mobility problems or medical disabilities. 1.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual 8. DO NOT drive across an incline or attempt to turn while on an incline. 16. ALWAYS keep arms and legs within the confines of the unit. 9. DO NOT back down an incline or allow the unit to be 17. USE EXTRA CAUTION when climbing inclines (ramps, hills, driveways, etc.). backed down an incline. 10. DO NOT turn off the power while the unit is moving. 18.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Important Information Regarding Electromagnetic Interference (EMI) It is very important that you read this information regarding the possible effects of electromagnetic interference (EMI) on your scooter. Electromagnetic interference (EMI) refers to the effects that outside sources of electromagnetic energy (radio and television broadcasts, CB radios, garage door openers, cellular telephones, etc.) might have on the control systems of your scooter.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Other types of hand-held devices like cordless phones, laptop computers, AM/FM radios, and small appliances like hair dryers or electric shavers may also generate electromagnetic energy, but it is such a small amount that, as far as we know, no EMI problems should occur with these devices.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY WARNING! Even with an immunity level of 20 volt/meter, certain precautions must be followed to ensure that your vehicle will not be affected by outside electromagnetic sources. • Do not operate hand-held transceivers such as citizen band (CB) radios or turn on powered communication devices such as cellular phones while the scooter is turned on. • Be aware of nearby transmitters, such as radio and television stations, and avoid coming close to them.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Getting to know your Model 140T/140F Your Model140T/140F scooter from Electric Mobility is a powerful, useful vehicle that offers increased mobility with easy, safe operation. Before using your 140T/140F, use this section to first familiarize yourself with the components, setup, controls, and adjustments to enjoy it safely and successfully. Components The Model 140T/140F consists of the following major components. Locations are shown in Figure 1.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Initial Setup Prior to using your Model 140T/140F, use the following to initially setup the vehicle for proper use and safe, comfortable operation. Initial setup involves installing the seat and front basket. If the vehicle is delivered with the seat and basket installed, you can skip this section and proceed with how to charge the battery before riding.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Seat Installation To install the seat begin by pulling the locking lever back, located beneath the seat. Insert the seat onto the seat post tube, and release the locking lever to lock seat in position. Turn the seat back and forth slightly allowing the lever to lock into position. Seat installation is shown in Figure 2. Front Basket Installation The front Basket installs on the basket mounting brackets located on the scooter handlebar assembly.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Charging Battery It is recommended to charge your batteries: • Upon initial receipt of your Model 140T/140F • For 6-8 hours (overnight) after extended use during the day • Whenever the battery meter indicator goes into the red area • The battery’s life expectancy may be shortened if batteries are left fully discharged for more than a day. To Charge the Battery: 1.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual 3. Locate Charger connection on top side of Battery Case housing. It is covered by a square, hinged door labeled “Charger.” Battery Case charging connection is shown in Figure 4. 4. Attach the separate AC line cord into the Charger. Connect other end to a 3 prong electrical outlet. There is an LED located on the Charger housing labeled High Power Tech. The LED will turn red to indicate charger is ready. 5.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Controls and Adjustments Before driving, it is suggested that you learn about the controls of the scooter and how to perform some initial adjustments to increase safety and improve rider comfort. Operating Controls The vehicle includes the following controls used for operation. BATTERY METER LED STATUS INDICATOR Dash Controls All major controls used while driving are located on the dash mounted on the handlebar assembly.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual LED Status Indicator - When the scooter is on, and all conditions are normal, the LED will be on. When there is a fault detected that needs attention, the LED will flash. Codes and faults are listed on page 37. Battery Meter — This instrument shows the level of charge in the batteries. When in the green area the batteries are fully charged.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Forward/Reverse Engager Levers — Selects movement direction and speed of the vehicle. To move forward, push the right lever towards the handle grip. To move in reverse, push the left lever towards the handle grip. Operating speed is proportional to the amount you push each lever. Smoother starts and stops can be accomplished by gradually moving each lever. Adjusting Armrests Your vehicle includes armrests.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual WARNING! DO NOT use armrest as support when transferring on or off the vehicle. Armrests are not designed to support weight of rider when getting on or off the seat. Adjusting Seat Seat Post Height Adjustments: The seat height can be adjusted manually. The seat post tube has two holes, so you can adjust the seat height that is most comfortable. The seat post tube and seat height locking pin is shown in Figure 8.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY 3. Position the Adjustable Seat Post Tube to your desired height and align the holes in the Seat Post Base and Seat Post Tube. Insert the Seat Height Locking Pin, making sure the pin is secure. 4. Replace the seat by holding the locking lever backwards, insert the seat onto the Seat Post Tube, and release the locking lever to lock the seat in place. Turn seat back and forth slightly allowing the lever to lock into position.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Adjusting Handlebar Assembly The angle of the handlebar assembly and dash may be adjusted to the individual rider’s preference. Multiple angles are available to reposition the handlebar assembly. The handlebar assembly angle adjustment knob allows you to position the handlebar assembly closer or further away for better access to the controls. To Adjust Handlebar Assembly Position: HANDLEBAR ASSEMBLY 1.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Handlebar Assembly Lock LOCK RELEASED POSITION If your 140T/140F is equipped with a handlebar assembly lock make sure to release the lock by pushing the lock release button. To engage lock push the locking pin down until you hear the pin click into place. Handlebar Assembly Lock is shown in Figure 10.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Using the 140T/140F Once you’ve gotten familiar with the 140T/140F components, controls, and have charged the Battery, you can use the following section to use it. This section presents instructions for: • Day-to-Day Use • Shipping and Transport If you are unsure of how to operate your vehicle, go back to the previous section before attempting any use.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Transferring On or Off the Vehicle Your 140T/140F has been designed to make transferring on and off the vehicle as easy as possible. WARNING! Make sure key is either in the OFF position or removed before transferring ON or OFF the vehicle. Use the following recommendations to assist you in making a more comfortable transfer. • Use the handlebar assembly angle adjustment knob to move the handlebar assembly away from seat for ease of transfer.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Driving Once seated on your vehicle, driving is as simple as using the Engager Levers to move forward (right lever) or reverse (left lever) and steering in the desired direction. Before driving, however, you should keep in mind the following recommendations. • Handlebar assembly is adjusted to comfortable riding position. • Motor is engaged. Check Brake Lever. Should be in “DRIVE” position. See Figure 11, page 22.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Inclines It is recommended that speed be reduced when traveling on (up or down) inclines. Select the slowest speed setting that will still allow the vehicle to climb the incline. NEVER try to turn around on an incline! If vehicle stops on an incline, DO NOT attempt to continue. When stopped on an incline, back down with the speed set at “slow” and back down in one continuous movement. DO NOT start and stop.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Brake Release Lever The 140T/140F features a “push mode” to allow it to be pushed by hand . To activate manually, turn the key switch OFF and locate the brake release lever on the right side of the rear cover. The Brake Release Lever is shown in Figure 11. Push lever towards front of vehicle, “PUSH MODE” position, to disengage the brake. Move lever back towards rear of vehicle, “DRIVE” position, to reengage the brake.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Overload Fuse If the vehicle is overloaded or is used outside its design parameters it may cause the overload fuse to engage. If this happens the vehicle will stop and beep to alert you. The Overload Fuse in shown in Figure 11. To Reset the Overload Fuse: 1. Turn key switch to “Off” position. 2. Wait 1-2 minutes. 3. Push overload fuse in. 4. Turn key switch to “On” position. EMC Part: 44000700 • Rev.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Disassembly & Re-assembly The 140T/140F can be quickly and easily disassembled into four components for storage or transport, then re-assembled when needed. Instructions to take your Model 140T/140F apart and put it back together are presented in this section. FRONT FRAME AND HANDLEBAR ASSEMBLY REAR DRIVETRAIN ASSEMBLY SEAT FRONT BASKET BATTERY CASE Figure 12 — Model 140F Disassembled EMC Part: 44000700 • Rev.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Disassembling Your Model 140T/140F Taking Model 140T/140F apart involves removing the seat and Battery Case, lowering the handlebar assembly, and disconnection the front frame assembly from the rear drivetrain assembly. To Disassemble Model 140T/140F: 1. Turn power “OFF.” Fold seat back down. 2. Remove the seat by holding locking lever backward and lift the seat up and off the seat post tube. Figure 13 - Battery Case Removal 3.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual 5. Lower handlebar assembly onto the frame using the handlebar assembly adjustment knob. 6. Grip seat post with one hand and angle the rear section upwards, as shown in Figure 15. 7. To detach the front frame from the rear, lift front frame off, as shown in Figure 16. Figure 15 - Rear Drivetrain Assembly Dissconnected Figure 16 - Front Frame Assembly Detachment EMC Part: 44000700 • Rev.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Re-assembling the Model 140T/140F The Model 140T/140F involves re-attaching the front frame assembly to the rear drivetrain assembly, locking the frame buckle, re-positioning the handlebar assembly and dash for driving operation, and installing the battery case and seat. To Reassemble the Model 140T/140F: 1. Place rear drivetrain assembly on firm, level surface with drivetrain resting on rear small wheels. 2.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual 3. Grip seat post and lower rear assembly so that front frame and rear drivetrain assembly are reconnected and contacts touch. 4. Fasten the frame buckle and secure the release latch. 5. Position handlebar assembly into preferred driving position. 6. Install Battery Case. 7. Install seat (see “Installing Seat” on page 8). 8. Turn key to “ON” position.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Transporting the 140T/140F By Car — To transport your 140T/140F by car, place each of the components into the trunk, being careful not to scratch or mark any of the finished surfaces. If you need assistance lifting weights, consider asking Customer Service Department or your authorized service center about the Power Trunk Lift.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual If traveling outside of the United States, you may require a different charger or an adapter for your present charger. Customer Service or your authorized service center can help you answer these questions and supply you with the charger or adapter you require. WARNING! This vehicle does not meet Federal Safety Standards for motor vehicle seating.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Maintenance and Servicing This section presents information to keep your 140T/140F in peak operating condition, including: • Preventative Maintenance • Troubleshooting • Factory Return Procedures Your 140T/140F requires only minimal maintenance and by setting time aside each month for careful inspection and checking items included in this section, you can be assured of a long, useful life of your 140T/140F vehicle. EMC Part: 44000700 • Rev.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Preventative Maintenance Performing periodic preventative maintenance on your 140T/140F will ensure long, useful operational life as well as identifying any potential problems that may occur that might effect safe use and operation of the vehicle. Maintenance topics are presented in the following. For convenience, a Preventative Maintenance Checklist is also included as an aid in performing and recording maintenance of your 140T/140F.
Model 140T/140F Owner’s Manual ELECTRIC MOBILITY Storage DO NOT store your 140T/140F Vehicle in damp conditions. This may affect the electronics if left for very long periods of time. Electronics Servicing of the drive electronics and charger should only be carried out by your local service center. These units are sealed and should not be opened. BROKEN SEALS WILL VOID YOUR WARRANTY. DO NOT operate your Model 140T/140F Vehicle in extreme weather conditions, i.e. very heavy rain or snow.
ELECTRIC MOBILITY Battery Model 140T/140F Owner’s Manual Keep your battery well charged (see Battery Charging section). Keep battery clean and in a dry frost-proof place. Keep battery contacts clean. To clean brush lightly with fine sand paper. IMPORTANT! It is not possible to predict the life expectancy of your battery. Different workloads will affect battery accordingly. Some 140T/140F Vehicle users will use their vehicle every day and for long periods of time.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Troubleshooting Guide This table is only a guide to aid you in getting your vehicle operating, should you have any problems. If you are unable to get your vehicle operating, call either Electric Mobility Customer Service toll free number located at the front of this manual or your local Authorized Service Center. Symptom Unit does not move Vehicle feels wobbly when driven Range less than expected Possible Cause 1. 2. 3. 4.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual 3. Cold weather reduces battery life 4. Defective charger Erratic behavior when engager operated 1. Faulty engager lever 2. Defective wiring harness Charger LED not lit 1. Cord not properly plugged-in 2. Faulty charger Brake squeals 1. Setscrew loose 2. Dirt in brake pad Brake release lever sticks 1. Rust and corrosion EMC Part: 44000700 • Rev.02 • 04/19/06 36 3. Allow batteries to reach room temperature and then fully recharge 4.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Stiffness in steering 1. Possible grime build up 2. Bearings in head tube worn 1. Lubricate bearings 2. Replace bearings Controller Fault Codes The controller used in Model 140T/140F includes internal diagnostics programming used to identify and troubleshoot faults. When this diagnostics programming detects a fault, the LED status indicator on the dash flashes consecutively to identify the fault.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Parts Ordering Procedures To help us serve you as quickly as possible have your phone number, vehicle serial number or your order number ready when you call. When ordering parts, please have your method of payment ready (i.e., credit card number and expiration date, check, etc.). All parts are shipped UPS Ground. Alternate shipping arrangements may be made for an additional charge based on weight and destination (i.e. UPS Next Day, UPS 2nd Day, etc.).
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Specifications Model Designation Model 140T/140F Dimensions: Length Width Height Wheelbase Ground Clearance Footroom 39” 20” 33” 30” 2” 3W - 12” 4W - 11” Weights: Total Weight Front frame Rear frame Seat Battery Weight 3W - 100 lbs 4W - 109 lbs 3W - 25 lbs 4W - 35 lbs 30 lbs 22 lbs 21 lbs Performance: Speed2 Range2 Turning Radius Hill Climbing Weight Capacity up to 3.8 mph up to 8 miles 3W - 33.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual Limited Warranty Electric Mobility Vehicles warrants the vehicle other than its component battery or batteries, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. If, within such warranty period, any such product shall be proven to Electric Mobility Vehicles satisfaction to be defective, such product shall, at option, be repaired or replaced.
Model 140T/140F Owner’s Manual EMC Part: 44000700 • Rev.
ELECTRIC MOBILITY Model 140T/140F Owner’s Manual EMC Part: 44000700 • Rev.
Model 140T/140F Owner’s Manual EMC Part: 44000700 • Rev.
