Operation Manual

Rascal AutoGo Owner’s Manual
EMC Part: 19286400 Rev.01 03/09/07
45
Battery Types: SR626SW, UCC 377, Ray-O-Vac RW329
1. Remove clock from the dash by gently prying the edge of the clock from the
dash.
2. Use a small screwdriver to open the case by inserting the screwdriver blade
into the notch on the back cover. Gently twist blade so that the back cover
comes off.
3. Slide the metal battery cover plate aside and remove battery.
4. Install new battery with positive pole (+) facing outwards. Slide battery cover
back in place over new battery.
After replacing battery, make sure time setting is correct before replacing clock
into dash.