Rascal AutoGo™ Owner’s Manual The Rascal Company 1 Mobility Plaza.
Rascal AutoGo Owner’s Manual Please read this entire manual before operating the vehicle. Failure to do so may result in damage to the vehicle or serious injury. The Rascal Company wishes to thank you for choosing the revolutionary Rascal AutoGo™vehicle for fun and convenience. As the World’s leader in the design and production of personal mobility vehicles, we take great pride in our ability to improve the quality of life for people desiring more mobility.
Rascal AutoGo Owner’s Manual CONTENTS Title Page Safety Information ................................................................................... 1 Getting to Know Your Rascal AutoGo ............................................. 5 Illustration 1 — Rascal AutoGo Components ............................................ 6 Initial Set-up ................................................................................................ 7 Unfolding ...........................................................
Rascal AutoGo Owner’s Manual Title Page Maintenance ................................................................................................ 38 Preventative Maintenance ........................................................................ 38 Frame Inspection .................................................................................. 38 Headlight ................................................................................................. 39 Lubrication ..............................
Rascal AutoGo Owner’s Manual ILLUSTRATIONS Number 1 2 3 4 5 6 7 8 9 Title Page Rascal AutoGo Components ............................................. 6 Battery Charging ................................................................... 9 Battery Pack Installation ................................................... 11 Tiller Adjustment Lever .................................................... 12 Controls ..............................................................................
Rascal AutoGo Owner’s Manual Safety Information Read and understand these Warnings and the entire manual before using your Rascal AutoGo. Failure to follow these instructions may result in damage to the vehicle or serious injury. IMPORTANT! 1. DO NOT exceed the specifications of this unit, modify this unit in anyway, or use the unit for a purpose other than as intended. turned “OFF”, completely stopped, and when it is on a stable and level surface. 5. DO NOT attempt to ride over curbs or other 2.
Rascal AutoGo Owner’s Manual 9. DO NOT back down an incline or allow the unit to be backed down an incline. 10. DO NOT turn off the power while the unit is moving. the unit. 17. USE EXTRA CAUTION when climbing inclines (ramps, hills, driveways, etc.). 11. ALWAYS remember vehicle capacity is limited to one 18. USE CAUTION when braking on an incline or wet or slippery surfaces as the unit may take longer to come to person only. This unit is not approved for towing or for a complete stop.
Rascal AutoGo Owner’s Manual Important Information Regarding Electromagnetic Interference (EMI) It is very important that you read this information regarding the possible effects of electromagnetic interference (EMI) on your vehicle. Electromagnetic interference (EMI) refers to the effects that outside sources of electromagnetic energy (radio and television broadcasts, CB radios, garage door openers, etc.) might have on the control systems of your vehicle.
Rascal AutoGo Owner’s Manual Other types of hand-held devices like cellular telephones, laptop computers, AM/FM radios, and small appliances like hair dryers or electric shavers may also generate electromagnetic energy, but it is such a small amount that, as far as we know, no EMI problems should occur with these devices.
Rascal AutoGo Owner’s Manual Getting to Know Your Rascal AutoGo Dash & Controls — The Rascal AutoGo is operated from the controls located on the dashboard and the Forward/ Reverse lever which controls the power folding/unfolding feature. Detailed descriptions of these controls are presented in a separate part of this section (see “Controls” on page 14).
Rascal AutoGo Owner’s Manual Illustration 1 — Rascal AutoGo Components EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Initial Set-up After receiving and unpacking your Rascal AutoGo use the following to initially set-up the vehicle. Set-up consists of unfolding it from the flat-fold configuration, installing the Battery Pack, installing/setting the dashboard clock, and charging the batteries. Unfolding The Rascal AutoGo is initially shipped in the flat fold configuration and must be unfolded for use.
Rascal AutoGo Owner’s Manual Charging Batteries The Rascal AutoGo is equipped with two maintenance-free, airline approved, sealed 12V/15A batteries with an integral automatic battery charger mounted in a detachable Battery Pack installed onto the front of the tiller. Because your batteries may only have a partial charge when you first receive your vehicle, you may not experience full riding time until you have fully charged them.
Rascal AutoGo Owner’s Manual Illustration 2 — Battery Charging EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Charge the batteries as follows: 1. For your convenience, you can detach the Battery Pack from the Rascal AutoGo and move it to a 3-Prong Grounded Electrical Receptacle. If you choose, you can also park the Rascal AutoGo near a 3-Prong Grounded Electrical Receptacle without removing the Battery Pack. WARNING! Use of a non-grounded receptacle could result in an electrical shock. 2.
Rascal AutoGo Owner’s Manual Installing the Battery Pack After the batteries have been fully charged, you’ll be ready to install the Battery Pack into the Tiller. Install the battery pack as follows (see Illustration 3). 1. Lift the Battery Pack by the handle and insert the bottom of the Battery Pack into the bottom of the Tiller. Line up the slot under the pack with the bar on lower shelf of tiller. 2. Firmly push the top front of the Battery Pack into the tiller until it “snaps” in place.
Rascal AutoGo Owner’s Manual Adjusting Tiller Position For your riding comfort, the Rascal AutoGo tiller can be used in two positions. To adjust tiller position: • Lift Tiller Position Adjustment Knob to release tiller lock • Adjust tiller to preferred position • Release knob to lock in place This adjustment lever is shown in Illustration 4 Illustration 4 — Tiller Adjustment Lever EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Installing & Setting the Dashboard Clock Your Rascal AutoGo comes with a removable, battery-powered, quartz clock that mounts directly in the dash. This clock is packed separately to allow you to set it to your local time before installing in the dash. Setting the Clock — Locate the bag containing items packed separately with the vehicle. Unwrap the clock from its protective packing.
Rascal AutoGo Owner’s Manual Controls The Rascal AutoGo includes the following controls (Illustration 5) used to operate the vehicle. Individual descriptions of each control are presented in pages 15-18. Illustration 5 — Controls EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Keyswitch To turn power on, turn the key to the “On” position (indicated by a solid black circle). To turn power off, turn key to “Off” position (indicated by an open circle). The Battery Gauge (Fuel Gauge) should be lit when the key is in the “On” position. Use of a key to turn the Rascal AutoGo on and off also protects against unauthorized use of your Rascal AutoGo.
Rascal AutoGo Owner’s Manual Dial-A-Speed Knob The Dial-A-Speed regulates the potential speed of the Rascal AutoGo. We strongly recommend setting it at 2 or 3 until you feel confident with controlling your vehicle properly. Turning the speed dial counter-clockwise decreases the top potential speed. Turning it clockwise (up to “10”) provides speed up to maximum potential speed.
Rascal AutoGo Owner’s Manual Battery Gauge (Fuel Gauge) The Rascal AutoGo includes an illuminated Battery Gauge that provides a visual indication of the electrical charge in the Battery Pack. It consists of 10 different LED bars (3 red, 4 amber and 3 green), that are lit in accordance with the state of battery charge.
Rascal AutoGo Owner’s Manual Horn Pressing the horn button on the dash sounds the horn to alert pedestrians of your approach. You may also find it helpful to use it when rounding blind corners or going in reverse. Light Switch Depress the switch button to turn the headlight ON. Depress the switch button again to turn the headlight OFF. Clock For convenience, the dash of the Rascal AutoGo includes a battery-powered, analog clock displaying the current time of day.
Rascal AutoGo Owner’s Manual Operating the Rascal AutoGo Once you’ve become familiar with the Rascal AutoGo components, controls, and have charged the Battery Pack, you can use the following section to operate it. This section presents instructions for getting on and off your vehicle, as well as driving it. It also details pushing it in freewheel mode and pulling it in freewheel mode. If you are unsure of how to operate your Rascal AutoGo vehicle, go back to the previous section before attempting any use.
Rascal AutoGo Owner’s Manual Transferring On or Off the Vehicle Your Rascal AutoGo has been designed to make transferring on and off the vehicle as easy as possible. WARNING! Make sure key switch is either in the OFF position or the key is removed before transferring ON or OFF the vehicle. Use the following recommendations to assist you in making a more comfortable transfer. • The Dash can be lifted up away from the tiller for greater clearance when getting on or off.
Rascal AutoGo Owner’s Manual 1. Tiller and dash are locked in position, facing the operator. 2. Frame Pivot Lock is engaged. 3. Seat is locked onto frame. Check latching lever. 4. Drivetrain is properly aligned and connected to frame. 5. Drivetrain clicks into position and locked. 6. Parking brake engaged. Check Brake Lever. Should be in “UP” position. 7. Armrests are lowered into driving position. WARNING! If any of these items are questionable, DO NOT OPERATE! Check before driving.
Rascal AutoGo Owner’s Manual Speed Settings The overall forward/reverse speed range of the vehicle is selected from the Speed Control knob on the dash. Lower settings result in slower speeds. Higher settings provide faster speeds. When first operating your vehicle, select slower settings until you feel comfortable. Inclines ALWAYS lean forward when traveling up inclines for greater stability. If vehicle stops on an incline, DO NOT attempt to continue climbing. We do not recommend stopping on an incline.
Rascal AutoGo Owner’s Manual Curbs and Small Obstacles ALWAYS climb or go down small obstacles slowly to avoid damage to the vehicle. DO NOT attempt to ride over curbs or any other obstructions higher than 1 inch (2.54 cm). Freewheel Operation The Rascal AutoGo features a “freewheel” mode to allow it to be pushed by hand (manual operation). To activate manually, turn the key switch OFF and locate the brake release lever under the rear cover on teh right side. Push lever down to disengage the brake release.
Rascal AutoGo Owner’s Manual Automatic Folding and Unfolding A key feature of the Rascal AutoGo is the ability to automatically fold and unfold it for ease of transport, storage, and use. The benefit is one can fold their vehicle without any bending or lifting. Instructions to automatically fold and unfold the Rascal AutoGo are provided in this section. Folding Instructions The Rascal AutoGo can be folded to a compact, vertical package when not in use for transport, or storage.
Rascal AutoGo Owner’s Manual 2. Pull Dash Release up and lift dash to upright position to engage wheel locks onto front wheels, see Illustration 7. 3. Position yourself on the right side of the Rascal AutoGo. Press the foot lever, as shown in Illustration 8, to retract the frame lock. Illustration 7 — Dash Release Lever EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual 4. Before releasing the foot release lever, lean the tiller forward slightly to start the folding sequence. Remove your foot from foot release lever. Make sure the main frame is above the pivot lock and you are ready to automatically power fold the vehicle. 5. Pull the right side Engager lever to activate drive motor and initiate fold. The Rascal AutoGo will automatically fold under its own power and stop.
Rascal AutoGo Owner’s Manual Illustration 9 — Folding Operation 6. When fully folded, latch the frame and tiller together by pressing the tiller back against the main frame, see Illustration 9. 7. When folded, lower the dash to release the front wheel locks. 8. Using engager levers, you can operate the Rascal AutoGo forward/backward, as needed. EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual WARNING! When moving vehicle in power folded position, use extreme care to avoid tripping or colliding with yourself, others, or other vehicles. Unfolding Information Follow these instructions and refer back to illustrations 6-9 to unfold the vehicle using the power unfold feature: IMPORTANT! Before attempting to unfold, make sure there is adequate clearance to the rear of the vehicle to accommodate unfolding. 1.
Rascal AutoGo Owner’s Manual Flat Folding and Unfolding As an added convenience, the Rascal AutoGo can be manually folded flat for storage or transport. When folded flat, the Rascal AutoGo can be easily stored in a car trunk, under your bed, or in a storage compartment. To flat fold the Rascal AutoGo: • Turn power “OFF.” If desired, seat can be removed for more compact storage.
Rascal AutoGo Owner’s Manual To unfold the Rascal AutoGo after being folded flat: • Raise tiller and dash to upright position • Pull dash release lever and return dash to driving position • Raise seat frame and lock into position using the Seat Frame Cams • Re-install seat (if removed) Unfolding is shown in Illustration 11. Make sure to test before riding. Illustration 11 — Unfolding Flat Folded Vehicle EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Disassembly & Re-Assembly In addition to easily folding and unfolding, the Rascal AutoGo can be quickly and easily disassembled for storage or transport, then re-assembled when needed. Instructions to take your Rascal AutoGo apart and put it back together are presented in this section. Taking the Rascal AutoGo Apart Taking the Rascal AutoGo apart involves removing the seat and Battery Pack, flattening the seat frame, and removing the drivetrain.
Rascal AutoGo Owner’s Manual 3. Lift Battery Pack handle up and pull forward to remove Battery Pack from tiller. 4. Flatten seat frame as shown in Illustration 13, by: — Rotating seat Frame Cams by pushing cam handles down until they lock, — Lifting the rear of seat frame up, 5. Pull Rear Frame back and lift crossover strap up until seat frame collapses to the rear. 6. Rear cams will return to original position 7. Lift Dash Release and lower tiller onto frame. EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual 8. The Quick Release Drivetrain lever is located at the rear, underneath the frame. Push the red Quick Release Drivetrain Lever with your thumb, as shown in Figure 14. While the lever is pushed, lift rear of the scooter using the crossbar located in front of release lever. The drivetrain will automatically disconnect and remain on ground, as shown in Figure 15.
Rascal AutoGo Owner’s Manual Re-assembling the Rascal AutoGo Putting the Rascal AutoGo back together involves re-attaching the drivetrain, re-positioning the tiller and dash, raising & locking the seat frame, installing the seat, and installing the battery pack for driving operation. Instructions to re-assemble the Rascal AutoGo are provided in this section. 1. Place drivetrain on firm, level surface with drivetrain kickstand facing the front of the Rascal AutoGo. 2.
Rascal AutoGo Owner’s Manual 3. Check brake lever is in the locked position (See page 23). Make sure the scooter cannot be moved with the ignition off. Fuel Gauge will flash on & off if Brake is in push mode and key is “On”. 4. Position tiller into one of two preferred driving positions. 5. Pull seat frame up into position, making sure crossover bar seats onto folding chassis. Seat Frame Cams will rotate up to lock in position. 6. Replace seat onto frame, making sure latch locks in place. 7.
Rascal AutoGo Owner’s Manual Transporting the Rascal AutoGo By Car — To transport your disassembled Rascal AutoGo by car, place each of the components into the trunk, being careful not to scratch or mark any of the finished surfaces. If you need assistance lifting weights, consider asking Electric Mobility’s Customer Service Department or your authorized service center about the Power Trunk Lift.
Rascal AutoGo Owner’s Manual If traveling outside of the United States, you may require a different charger power cord for your battery pack. Contact Customer Service or your authorized service center can help you answer these questions and supply you with the appropriate charger cord you may require. WARNING! This vehicle does not meet Federal Safety Standards for motor vehicle seating.
Rascal AutoGo Owner’s Manual Maintenance This section presents information to keep your Rascal AutoGo in peak operating condition, including: • Preventative Maintenance • Troubleshooting • Parts Ordering Procedure Your Rascal AutoGo requires only minimal maintenance and by setting time aside each month for careful inspection and checking items included in this section, you can be assured of a long, useful life of your Rascal AutoGo vehicle.
Rascal AutoGo Owner’s Manual WARNING! DO NOT use vehicle if frame damage is present. Severe personal injury may result. Additionally, check conditions of reflectors mounted on frame. Replace any missing or damaged reflectors to maintain proper visibility. Headlight Although the headlight of the dash uses a long-life halogen bulb, it may burn out, especially if left on for a long period of time, and require replacement.
Rascal AutoGo Owner’s Manual Due to environmental conditions, movement may become stiff and difficult. If movement becomes difficult, use of a spray lubricant can be used to restore easy movement. Use a spray lubricant such as WD-40. Use lubricant sparingly and avoid contact with vinyl or painted surfaces. Tires Front and rear tires of the Rascal AutoGo are foam-filled and do not require air pressure. Tires should, however be checked periodically for damage, cuts, flatspots, or excessive tread wear.
Rascal AutoGo Owner’s Manual Polishing Polish all plastic components to help protect them from scratches and a dull finish. This can be done by using a non-abrasive auto polishing material available at your local automotive parts dealer or local department store (automotive section). Make sure to clean the surface first with an auto body cleaner using a soft cotton cloth and dry before polishing. To bring out the shine, follow the manufacturer’s instruction on the polishing material.
Rascal AutoGo Owner’s Manual Illustration 17 — Cable Turnbuckle Adjustment EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Drivetrain The parking brake of the drivetrain includes an adjustment setscrew for the brake pad. If brake starts to squeal, tighten setscrew. Brake nut should be set 1/6" (1.5 mm) from brake pad. Periodically clean dirt in brake pad by blowing dirt out with air pressure hose. If brake release lever becomes difficult to move, lubricate with a light oil or spray lubricant. Be careful not to get oil onto the brake pad.
Rascal AutoGo Owner’s Manual Replacing Clock Battery After time, the dash clock may begin to lose time, or stop, when the battery runs down. The battery is easily replaced by removing the clock from the dash, prying open the clock’s case, and inserting a new battery. Battery location is shown in Illustration 18. Use the following to replace the clock battery. Illustration 18 — Replacing Clock Battery EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Battery Types: SR626SW, UCC 377, Ray-O-Vac RW329 1. Remove clock from the dash by gently prying the edge of the clock from the dash. 2. Use a small screwdriver to open the case by inserting the screwdriver blade into the notch on the back cover. Gently twist blade so that the back cover comes off. 3. Slide the metal battery cover plate aside and remove battery. 4. Install new battery with positive pole (+) facing outwards. Slide battery cover back in place over new battery.
Rascal AutoGo Owner’s Manual Troubleshooting Guide This table is only a guide to aid you in getting your vehicle operating, should you have any problems. If you are unable to get your vehicle operating, call either Electric Mobility Customer Service toll free number located at the front of this manual or your local Authorized Service Center. Symptom Possible Cause Solution Unit does not move 1. 2. 3. 4.
Rascal AutoGo Owner’s Manual 4. Defective charger Erratic behavior when engager operated 1. Faulty engager 2. Defective wiring harness Battery Pack LED not lit 1. Cord not properly plugged-in 2. Faulty charger Brake squeals 1. Setscrew loose 2. Dirt in brake pad Brake release lever sticks Stiffness in steering temperature and then fully recharge 4. Contact Electric Mobility or your Authorized Service Center 1. Contact Electric Mobility or your Authorized Service Center 2. Replace harness 1.
Rascal AutoGo Owner’s Manual Controller Fault Codes In addition to the troubleshooting information in the previous section, the controller used in the Rascal AutoGo provides diagnostic information through means of a Fault Code Display that appears on the Battery Gauge. When a fault is detected, selected segments of the Battery Gauge will light to indicate the faults. Codes and faults are listed in the following.
Rascal AutoGo Owner’s Manual Parts Ordering Procedures To help us serve you as quickly as possible have your phone number, vehicle serial number or your order number ready when you call. When ordering parts, please have your method of payment ready (i.e., credit card number and expiration date, check, etc.). All parts are shipped UPS Ground. Alternate shipping arrangements may be made for an additional charge based on weight and destination (i.e. UPS Next Day, UPS 2nd Day, etc.). EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual Accessories Your Rascal AutoGo can include several useful accessories to make your riding experience more enjoyable, convenient, and easier.
Rascal AutoGo Owner’s Manual Specifications1 Electrical: Dimensions: Length Width Height Folded, Vertical Folded, Horiz., w/Seat Folded, Horiz., w/o Seat Wheelbase Ground Clearance Footroom 41-42” (104-106 cm) 21” (53.3 cm) 37” (94 cm) 38” (96.5 cm) H x 21” (53.3 cm) W x 22” (55.8 cm) L 23” (58.4 cm) H x 21” (53.3 cm) W x 38” (96.5 cm) L 21” (53.3 cm) H x 21” (53.3 cm) W x 38” (96.5 cm) L 30.5” (77.4 cm) 2” (5 cm) 15” 38.1 cm) L x 5” 12.7 cm) W Weights: Frame Battery Pack Drivetrain Seat 45 lb. (20.
Rascal AutoGo Owner’s Manual Warranty The Rascal Company, warrants the vehicle, other than its component battery or batteries, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. If, within such warranty period, any such product shall be proven to The Rascal Company, satisfaction to be defective, such product shall, at option, be repaired or replaced.
Rascal AutoGo Owner’s Manual EMC Part: 19286400 Rev.
Rascal AutoGo Owner’s Manual EMC Part: 19286400 Rev.
