Operation Manual

Rascal 600B/700B Owner’s Manual

EMC Part: 19278100 Rev. 3 ◦ 06/29/2009

Removing the Front Section

CAUTION

• Carefully stand scooter upright onto rear bumper.

• Follow tiller harness to locate the harness connection. Disconnect

wiring harness at connector, as shown in Illustration 12.

• Remove harness from under harness guide and pull out the Quick-

Disconnect frame pin as shown in Illustration 13.

12 13

ILLUSTRATIONS 12 & 13 – Removing Harness Connection

and Frame Pin

Always make sure the Velcro battery tie down strap is connected or batteries are

removed before standing vehicle upright onto the rear bumper.