Operation Manual

Rascal 600B/700B Owner’s Manual
EMC Part: 19278100 Rev. 3 ◦ 06/29/2009
28
Removing the Dash and Handlebar
• Pull connector away from socket.
• Lift handlebar straight up to remove from front fork.
Re-Assembly Notes: Ensure that connector latches in place. Verify that
the front wheel and the handlebar are pointed in same direction before
reassembling.
Removing the Seat
• Hold the Locking Lever backward (located on side of seat).
• Lift the seat straight up and off the Seat Post. Seat post has been
factory-lubricated with petroleum jelly for ease of movement.
BE
CAREFUL to keep lubricated areas free from clothing, carpets, etc. to
avoid stains when removing seat.