Operation Manual

Rascal 600B/700B Owner’s Manual

EMC Part: 19278100 Rev. 3 ◦ 06/29/2009

3. Lift folding armrests up and out of your way for added room to transfer.

Once seated on the vehicle it is important that the rider check the

following items before operating the vehicle.

• The Seat is locked into the forward position.

• The Scooter Dash is pulled down into riding position.

• The Folding armrests are down and in the riding position.

Driving

Once seated on your Rascal scooter, driving is simple. Set Dial-a-Speed

Knob to desired speed range. Use the Engager Lever to move forward

(squeeze right side) or reverse (squeeze left side). Steer in the desired

direction. Before driving, however, you should confirm the following:

• Green Status Lamp is “ON” and not flashing

• Key is in “ON” position.

Braking System

Whenever the engager lever is moved out of the neutral position, the

electromagnetic brake will automatically release and your scooter will

move. When the speed engager lever is released, it will return to the

neutral position and the scooter will decelerate with regenerative braking

and come to a complete stop. The parking brake will then engage

preventing further movement of your scooter. If your scooter ever moves

in an unexpected manner, release the speed engager lever. Once the

scooter has come to a complete stop, turn off the power. Your unit is

equipped with a controller that has a high pedal disable safety feature.

This will prevent unexpected acceleration of the scooter, if the speed

engager lever is activated at the same time you turn the key ON. To reset

the controller, release the speed engager lever and turn the key OFF, then

turn it back ON.

Safety Feature

There is a time delay between the release of the engager lever and when

the parking brake automatically activates. This delay allows your vehicle to

gradually slow down before the parking brake activates so you will come

to a smooth stop.