Operation Manual

POWER SEATING OWNERS MANUAL
TILT/RECLINE COMBINATION SYSTEMS
Key Features:
Tilt Seat:
• Tilt range – adjustable between 0° to 55°
• Occupant weight limit – 250 to 350 lbs. (Depending on the base)
o
250lbs for 312 Base
o 300lbs for 301 Base
o
350lbs for 710 Base
• Operating speed – 2°/s (5.8mm/s)
Reclining Back:
• Recline Range – Infinite between 85° to 165° at 3° Seat Angle
• Occupant Weight Limit – to 350 lbs. (Depending on the base)
• Operating Speed – 5.3°/s (6.6mm/s)
Setting Up:
The EMC Power Tilt and Recline System will arrive ready for use and the Rascal
Mobility Consultant will make any final adjustments needed to ensure all the appropriate
dimensions, functions and devices are in place and the product is ready for your use.
Operating the Tilt and Recline System:
The standard method for operation of the powered seating system is through a Toggle
Switch. Figure 3 below details operation using a toggle switch. Note: The tilt and
recline feature of the seating system may in some cases be run through the joystick.
FIGURE 3 – Four Way Toggle Switch
Illuminating
LED light
• To tilt back, move the toggle switch forward.
• To tilt forward, release the toggle switch to neutral position, then move the toggle switch
forward.
• To recline back, move the toggle switch back.
• To incline forward, release the toggle switch to neutral position, then move the toggle
switch back.
NOTE: The four-way toggle switch will alternate functions (move actuator
UP, move actuator DOWN) after it has been released to the neutral position for
a minimum of one (1) second.
EMC Part: 19254300 ● Rev. 03 ● 07/28/06
10