User guide

Chapter 3: Rackmount and Installation
23
c. The Channel Configuration submenu appears. Use the and
keys or Tab to move the yellow highlight to the Name field for the
channel port number where you installed the server and press
Enter. The highlight turns light blue.
d. Edit the name (the highlight turns green when you start typing).
Press Enter when finished, and press S to save the new name.
e. Press F2 to return to the Selection Menu. Verify that the new
name appears in the Selection Menu.
7. Repeat Steps 5 and 6 for each CIM and server you want to connect to
the Paragon switch’s channel ports.