User guide

Chapter 1: Introduction
9
 Remote control by the administrator and authorized users through
Paragon Manager
• Supports authentication with an appropriate smart card when using
Paragon II reader-enabled components:
 P2-EUST/C
 P2CIM-AUSB-C
• Supports using Belkin
®
OmniView
®
Secure KVM Switch or Raritan
Dominion
®
KX II as the front end of the Paragon system
• Supports multiple audio/video routing through the integration with the
NVISION
®
NV5128 router
Special Notes:
(1) P2-EUST/C supports Windows, Linux, Mac, and Sun operating
systems, but its integrated card reader supports Windows (including
Windows Server 2008) and Linux operating systems only.
(2) Paragon II releases 4.2 and 4.3 are not compatible with the Paragon II
System Controller (P2SC). They are considered "standalone" releases
and are not supported for installation in a Raritan PCCI environment. As of
release 4.3.1, Paragon II returned to compatibility with P2SC. Existing
Paragon II System Controller customers may upgrade their Paragon II
components to 4.3.1 or higher to benefit from recently added features and
maintenance fixes. Please see the Paragon II 4.3.1 release notes for
minimum firmware levels.
Package Contents
Paragon Main Unit (P2-UMT242, P2-UMT442, P2-UMT832M, or
P2-UMT1664M):
• Main Unit x 1
• 20-ft. (6.1-m) Cat5 test cable x 2
• 6-ft. (1.8-m) AC power cord x 1
• Rackmount kit x 1 (including brackets and associated screws)
• Quick Setup Guide x 1
Paragon Stacking Unit:
• Stacking Unit x 1
• RUMT-1U-LM304 or RUMT-2U-LM304 rackmount kit x 1
• 6" stacking cable(s)--the number of cables vary depending on the
model you purchased
 P2-UMT832S: Stacking cable x 1
 P2-UMT1664S: Stacking cable x 2