User guide

Chapter 1: Introduction

 Power control permissions may be set on a per-outlet basis

• Supports the use of Pinnacle FastAction keyboard (when used with

P2CIM-APS2 or P2CIM-APS2DUAL)

• Supports 10-BaseT, half duplex network speed (not configurable)

• Supports IBM BladeCenter® servers. The following BladeCenter

systems are supported:

 BladeCenter E (also referred to as model 8677)

 With MM model 48P7055

 With AMM model 25R5778

 BladeCenter H (also referred to as model 8852)

 With AMM model 25R5778

Note: IBM has updated the BladeCenter frequently since its original

release. For best results, please use P2CIM-AUSB-B firmware level

0A8 or later. or P2CIM-APS2-B firmware level 0A3 or later.

• Supports the use of a 121-key Cortron rugged keyboard at the local

site when used with the following Paragon II user station:

 P2-EUST or P2-EUST/C with firmware version 3E46 or later

 P2-USTIP with firmware 4.5.0.5.12 or later (local PS/2 port only)

Both PS/2 (part number 536-0062) and USB keyboards (part number

524-0079) are supported. Those with built-in Sun keys are also

supported, and the Sun power key may be used to turn off the server,

but not turn it on.

• Supports the use of a Kensington Expert Mouse® and Turbo Mouse

trackball (Model #: 64210) at the local site when used with the

following Paragon II components:

 User station: P2-UST, P2-EUST or P2-EUST/C

 CIM: P2CIM-AUSB, P2CIM-AUSBDUAL or P2CIM-AUSB-C with

the latest CIM firmware

• Supports Multiple Video, also known as “Port-Following Switch.”

Multiple Video enables:

 Up to 16 user stations to simultaneously view the video output of a

server that has multiple video outputs.

 Up to 16 servers to simultaneously output their video data

Note: The 16-channel video output is available on P2-UMT1664M

models only as of release 4.7, and it is required to use Paragon

Manager 2.0.4 or later.

• Supports video redirection to a specific user station (known as

“Forced Video”)

 Local control by the administrator