User guide

Chapter 7: Operation - Administrator Functions
126
To control power from the Outlet Selection Menu
A connected Power Strip is treated as a tiered device. The Power Strip,
therefore, has its own device menu consisting of “ports” for each power
outlet with which power can be controlled on a per-outlet basis.
• Navigate the Paragon II OSUI Selection Menu, select the Raritan
Power Strip and press Enter. You will now be at the “Outlet Selection”
menu.
• A list of outlets (up to 8 per page) will appear. Outlets in green are
switched ON; outlets in black are switched OFF.
• Press X, O, or R to turn off, turn on, or recycle power to the outlet
respectively. Type yes to confirm turning off the power if you select X
or R.
Getting Power Strip Unit Status from the Outlet Selection Menu
At any time while navigating the “Outlet Selection” Menu, pressing F11 will
provide a status screen showing certain parameters of the connected
power strip. These parameters vary depending on the model of the power
strip, and they may include:
• Average power
• True RMS Current
• True RMS Voltage
• Internal Temperature
• Apparent Power
• Maximum Detected
• Outlet Circuit Breaker
Note: Unlike second-tier channel ports, the power outlet “channel ports”
will not appear in the list of channels when the OSUI is sorted by the
channel name.