User guide

Chapter 7: Operation - Administrator Functions
103
If Login Sleep is set to Saver or Green, in the Minutes field, type
the number of minutes of inactivity before Login Sleep is triggered.
Using leading zeroes if necessary, type a two-digit number of
minutes from 01 to 99, or use the
and keys to increase and
decrease the current value by 1 respectively. The default setting is
05. If Login Sleep is set to “Off,” the number in this field has no
effect.
 Require Password: Determines whether a user can specify a
blank password, that is, delete any existing password and have no
password at all. Use the
and keys to toggle between “No”
(users may delete their existing passwords) and “Yes” (the default
setting; starting with the first time they change their password,
users must always specify a password). Newly created users
always start with no password, and must assign one to
themselves during initial setup.
 Default Login Name Blank: Determines whether the User Name
field in the Login screen will be blank, or if the field will contain the
default user name (the first available “userxy” name, where “xy” is
a two-digit number with leading zeroes—“user01,” “user02,” and
so on). Use the
and keys to toggle between “Yes” (the field
is blank – the default value) and “No” (field contains the user
name).
2. When you are finished, either press Enter followed by the letter S to
save your changes, or press Esc to abort the changes and continue
using the previous settings.