User guide

Chapter 6: Operation - User Functions

 Choose a non-ACTIVATOR channel in the Selection Menu.

The FOLLOWER user stations' monitors remain showing the

FOLLOWER channel videos, while the keyboard and mouse

control is back on these user stations.

• Power cycle the desired user station(s), be it an ACTIVATOR or

FOLLOWER user station.

Note: If the user station is P2-USTIP, it automatically enters the

remote mode when quitting the Multiple Video mode. Press

Ctrl+Alt+Delete on the P2-USTIP if you want to return to the local

mode.

Limitation

• The function is not applicable to those channels which share only one

path via the tiered device, such as P2ZCIM, P2CIM-APS2-B or

P2CIM-AUSB-B (for IBM BladeCenter servers).

• For 16-channel associations, the associated channel ports must be on

the Base Unit if your Paragon system is a multi-tier configuration.

Messages on the ACTIVATOR User Station

The success or failure of data outputs from the FOLLOWER channel(s)

will be reported on the screen of the ACTIVATOR user station (see the

example images below).

The 1st FOLLOWER channel successfully outputs its data

The 2nd FOLLOWER channel successfully outputs its data

The 3rd FOLLOWER channel fails to output its data

Every FOLLOWER channel successfully outputs its data