User guide

Chapter 6: Operation - User Functions
82
Concurrent Multiple Video Outputs
You can access one single channel and thus activate the video outputs of
another or several other channels at the same time. That is, when a
channel is selected in the Selection Menu, the other pre-configured
channel(s) automatically output video data to subsequent user stations.
This function is called “Multiple Video” or “Port-Following Switch.” It is
especially useful if you have a multi-channel video server, or intend to set
up a TV wall in the Paragon II system.
Performing this function requires the channel association to be
pre-configured in Paragon Manager. Only the administrator is allowed to
set up the channel association. If the desired association has not been
configured, contact your Paragon II system administrator.
Note: To download Paragon Manager, see Installing Paragon Manager
(on page 209).