User guide

Chapter 6: Operation - User Functions

Key Action

F10

Toggle the display of all channel ports (including inaccessible

ones) on or off

F11

View the Unit Status Menu for connected Raritan Remote

Power Control unit (available only from Power Control Menu)

F12

Toggle the Selection Menu's sorting way: numerically by port

number or alphabetically by name

Esc

Exit the current OSUI screen

Note 1: If a user owns administrator privileges but is not the administrator

(the Admin account), functions F6 and F7 are shown in red in the Help

Menu, indicating that these functions are not available.

Note 2: If a system administrator has set Display All Computers to "No,"

then F10 is shown in red in the Help Menu for all users, indicating that this

function is not available (even for administrators).

Note 3: Raritan recommends using a Sun keyboard when there are any

Sun servers in your system. If you want to control Sun servers with a PS/2

keyboard instead, see Information about Keyboard, Mouse and Video

(on page 45).

Information Menu

When the OSUI (On Screen User Interface) is visible, activate the

Information Menu by pressing F8. This menu displays the “vital statistics”

of the user station that you are using, including its firmware, hardware, and

FPGA revisions, serial number, which console port (user port) and port

number on the Paragon switch attached to it, and the number of KVM

switches and PCs (servers) that can be accessed through it.