User guide

Chapter 6: Operation - User Functions
78
 If the ID Display is set to “On,” the number in the second field,
Seconds, indicates how many seconds it will remain onscreen.
Using leading zeroes if necessary, type a two-digit number of
seconds from 01 to 24, or use the
and keys to increase and
decrease the current value by 1 respectively. If you type a number
greater than 24, the second field will be filled with a “- -”, indicating
that the ID Display will be shown at all times. The default setting is
03. If the ID Display is set to “Off,” the number in this field will have
no effect.
• Sleep Mode: A power-saving mode that is activated once a user logs
in. Sleep mode acts as a screensaver if the user station is idle (no
keyboard or mouse activity) for a specified amount of time. Sleep
mode is user-specific; whatever mode a user sets applies to only that
user once logged in. Edit this field and the Minutes field that follows to
determine how the system handles sleep mode. Possible values are
Saver, Green, and Off. Use the
and keys to toggle between
these values.
 Saver: The OSUI, with or without background, is a “floater” and
appears regularly in random locations on the screen.
 Green: The monitor goes blank.
 Off: Sleep Mode is disabled and the screen displays normal video
indefinitely.
 If Sleep Mode is set to Saver or Green, in the Minutes field, type
the number of minutes of inactivity before Sleep Mode is triggered.
Using leading zeroes if necessary, type a two-digit number of
minutes from 01 to 99, or use the
and keys to increase and
decrease the current value by 1 respectively. The default setting is
05. If Sleep Mode is set to “Off,” the number in this field will have
no effect.