User guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Operation – User Functions
- Chapter 4: Operation – Administrator Functions
- The Administration Menu
- Guidelines for System Configuration
- System Configuration
- Video Redirection (Forced Video)
- Channel Association for Multiple Video
- User Configuration
- Channel Configuration
- User Station Profile
- Group Settings (Access Rights)
- Recommendations
- System Reboot and System Reset
- Network Settings
- Autoscan and Autoskip
- Power Management
- Paragon II Network Port
- Chapter 5: Paragon II and P2ZCIMs/Z-CIMs
- Chapter 6: Managing IBM BladeCenter Servers
- Chapter 7: Configurations
- Chapter 8: Firmware Upgrade
- Appendix A: Specifications
- Appendix B: User Station Direct Mode
- Appendix C: Tiering and Compatibility
- Appendix D: Paragon II Rack Mount
- Appendix E: Connecting Serial Devices to Paragon II System
- Appendix F: Extra Keyboard/Mouse Information and Settings
- Appendix G: Recommendation for Better Video Quality
- Appendix H: Other Components Working with Paragon II
- Appendix I: Troubleshooting
138 PARAGON II USER GUIDE
PCCI Integration
In the PCCI (Paragon CommandCenter Integration) environment, Paragon II works within the
PIISC setup, and we recommend you first read the Paragon II System Controller (PIISC) user
manual for initial installation and configuration of your Paragon II System Controller unit. This
document is found on the “User Manuals & Quick Setup Guides” CD included with your
shipment, or can be downloaded from the Support section of your local Raritan Website.
In North or South America, do the following:
1. Visit http://www.raritan.com/support/productdocumentation
with your browser.
2. Scroll down the page to the Paragon II System Controller heading.
3. Click on the User Guide
link.
Special Note:
Paragon II Release 4.2 is not compatible with the Paragon II System Controller. Release 4.2 is
considered a “standalone” release and is not supported for installation in a Raritan PCCI
environment. PCCI integration is planned for an upcoming release.
Current Paragon II System Controller customers who wish to expand their Paragon II
infrastructure by adding Paragon II switches and user stations are advised to specially request
new equipment that is provided with firmware version level 4.1 when placing an order.