User manual

CHAPTER 7: CONFIGURATIONS 69
Diamond Configuration
The following procedure must be followed to ensure this configuration functions properly:
− After re-connection, all UMT Matrix Switches should undergo a FUNC reset to clear the switch
database. This procedure should be performed starting from the third tier device down to the base
unit.
− Execute the FUNC reset in the following order: UMT-3A → UMT-2A → UMT-2B → UMT-
Base 1.
Figure 59 Diamond Configuration
UMT-Base 1
UMT-3A UMT-3B
UMT-2BUMT-2A