User manual

CHAPTER 3: OPERATION – USER FUNCTIONS 31
• Local PC: Use any of the arrow keys to toggle Local PC Mode On or Off (the default) for the attached
User Station. Turn PC Mode “On” only if you have used a Z-CIM to attach a local PC between the
User Station and the Base Unit.
You can change, delete, or reinstate your password (if “Allow Blank Password” is set to “Yes”) while the
User Profile Menu is on-screen by pressing P. Type your old password at the first prompt. Type a new
password up to eight characters long at the next prompt, and press the Enter key. To delete your password,
press the Enter key without typing anything in the field. Confirm the new password by typing it again at
the third prompt; then either press the Enter key to save the new password or Esc to abort the change and
continue using the old password.
Note: Be careful when you change your password! If you forget or lose it, the Administrator has no way of
recovering or erasing it – your account will have to be deleted and recreated.
Help Menu
When the OSUI is open, activate the Help Menu by pressing function key F1. This menu displays a list of
the function keys and their help functions.
Figure 33 Help Menu