User manual

20 PARAGON II USER MANUAL
b. Assign the Stacking Unit ID using the  and  keys.
6. Press the ENT button (sequential order is not necessary).
7. Power OFF all units.
8. Power ON the Stacking Unit.
9. Power ON the Main Switching Unit.
Installing a HubPac
The Paragon HubPac (part number P2HUBPAC) expands user access capability to a maximum of 64 users.
Each HubPac is capable of connecting 16 servers to 4 Paragon Matrix Switch units.
CIM models capable of connecting to a HubPac include:
• P2CIM-PS2
• P2CIM-SUN
• P2CIM-USBG2
Figure 26 Paragon HubPac
Installing a HubPac
Please use the Basic Installation instructions that follow to create 32-user Paragon Matrix Switching
configuration.
UserStation
(1-8)
1IN
1-1 1-2 1-3 1-4
UserStation UserStation UserStation UserStation UserStation UserStation UserStation
ENT
FUNC
ESC
ENT
FUNC
ESC
ENT
FUNC
ESC
ENT
FUNC
ESC
(1-8) (1-8)
(1-8)
(Users 1-8) (Users 9-16) (Users 17-24) (Users 25-32)
Up to 32 Users Per Server
Back of HubPac
5IN
5-1 5-2 5-3 5-4
6IN
6-1 6-2 6-3 6-4
7IN
7-1 7-2 7-3 7-4
8IN
8-1 8-2 8-3 8-4
1IN
1-1 1-2 1-3 1-4
2IN
2-1 2-2 2-3 2-4
3IN
3-1 3-2 3-3 3-4
4IN
4-1 4-2 4-3 4-4
AC Power
115V/230V
60Hz/50Hz
AC IN
0.6A/0.3A
On Off
Server
UKVMP
Cat 5e Cable
UMT832
USTI
Cat 5e Cable
Cat 5e Cable
Figure 27 Connecting a P2-UMT832M to a HubPac
1. Power OFF each Paragon switch
Note: Prior to installation all Paragon switch units and HubPac units must be powered OFF. Computers
and User Stations (UST1s) to be connected can be in a powered ON state.