User manual

CHAPTER 2: INSTALLATION 15
b. Press F5 to activate the Administration Menu. Use the up- and down-arrow keys to move the
highlight to the Port Configuration entry and press the Enter key to select it.
Figure 20 Administration Menu
c. The Channel Configuration menu will appear. Use the up- and down-arrow keys to move the
yellow highlight to the Name field for the channel port number where you installed the CPU and
press the Enter key. The highlight should turn light blue.
Figure 21 Channel Configuration Menu of a P2-UMT832M
d. Edit the name (it should turn green when you start typing). Press the Enter key when you finish,
and then press S to save the new name.
e. Press the Enter key to return to the Selection Menu. Verify that the new name appears in the
Selection Menu in green.
7. Repeat steps 5 and 6 for each P2CIM-PS2 and CPU you want to connect to the Base Unit’s channel
ports.