User guide

Chapter 6: Device Management
141
Full-duplex allows communication in both directions
simultaneously.
Note: Occasionally there are problems running at 10 Mbps in either
half or full duplex. If you are experiencing problems, please try
another speed and duplex.
See Network Speed Settings (on page 228).
• Select the Bandwidth Limit.
 No Limit
 128 Kilobit
 256 Kilobit
 512 Kilobit
 2 Megabit
 5 Megabit
 10 Megabit
 100 Megabit
Device Services
Use the Device Services page to specify the connection options for the
KX II-101.
To configure the discovery port:
1. Choose Device Settings > Device Services. The Device Services
page opens.
2. Type the network port used by the KX II-101 to communicate with
the Client PC.
3. Click Save to save the setting.
To enable TELNET Access:
1. Choose Device Settings > Device Services. The Device Services
page opens.
2. Select Enable TELNET Access.
3. Type the network port used for TELNET access to the KX II-101.
4. Click Save to save the setting.
To enable SSH Access:
1. Choose Device Settings > Device Services. The Device Services
page opens.