User`s manual
3
Getting Started
MasterConsole II is designed for quick, easy installation and operation. Follow the steps
for either one-tier or two-tier configuration to be up and running within minutes:
1. Install MasterConsole II (connect computers).
2. Configure MasterConsole II.
3. Assign computer names and set channel-specific scan rates for attached computers.
4. Turn ON security and change passwords if you want to restrict access to computers
connected to MasterConsole II.
5. Operate using On-Screen User Interface or front panel buttons.
6. Install optional Cat5 Reach for remote console or satellite unit.
Quick-Start Operation
After you connect computers to your MasterConsole II you may wish to explore
MasterConsole II operation with the default names and parameters.
You may operate using the front panel buttons and/or the On-Screen User
Interface. To activate On-Screen User Interface, press the <ScrollLock>> key
twice rapidly. The Selection Menu will appear. To select a computer, use the
<Ï>/<Ð> keys to highlight the desired channel (computer) and press
<Enter>or press the desired computer's Key number (located in the left-hand
column). To select another computer, use front panel buttons or re-activate the
On-Screen User Interface.