User`s manual

30
Cat5 Remote KVM Port The Keyboard, Monitor, and Mouse ports on the back of
the Cat5 Remote KVM Module unit.
Satellite Unit Second-tier MasterConsole II located more than 30 feet
from the base unit and connected through its Remote
Access Kit.
Scan Front panel button and On-Screen User Interface function
used to activate AutoScan.
Scan Rate The duration (in seconds) a channel’s computer is to
remain displayed on the monitor when AutoScan is
activated.
Global Scan
Rate
Scan rate is the same for all computers, if the Mode field
in the Configuration Menu is set to Global.
Channel-
Specific
(Individual)
Scan Rate
Scan rate specified for each computer during the Scan
cycle, if the Mode field in the Configuration Menu is set to
Individual. Channel-specific scan rates can be set in the
Edit Names and Scan Rate Menu.
Security When activated, and the system remains idle for a period
of time, the next user must enter an authorized User
Password to establish access.
Selection Menu Used to select a computer.
Sorting Order of the channels listed in Selection Menu; either by
Channel ID or by Name.
Time Out Is the length of time that the system can remain idle (that
is, since the last keyboard/mouse or front panel operation)
before the next user must enter an authorized User
Password to establish access.
User Password Enables access to the system after Time Out.