User`s manual

29
Edit Names and Scan
Rate Menu
Used to assign meaningful Names to each channel and
set Channel-Specific Scan Rates.
Green Mode A field in the Configuration Menu used to toggle the
PowerSave feature ON/OFF.
Hot Key Used to activate On-Screen User Interface. (To activate
On-Screen User Interface, press the hot-key twice
rapidly).
ID Display The display shown on the monitor to identify the currently
selected channel.
Key Left-hand column in the Selection Menu; lists the key
numbers (a sequence of numbers) for the channels listed
on that page. To quickly select a channel, press its Key
number when the Selection Menu is displayed.
KVM Port The Keyboard, Monitor, and Mouse connectors on the
back of the MasterConsole II unit.
Menu An On-Screen User Interface display.
Menu F Keys Function keys used to access On-Screen User Interface
menus while On-Screen User Interface is activated.
Mode Field in the Configuration Menu; can be set to either
Global or
Individual. See also Scan Rate.
Name A user-assigned label (up to eight characters) for a device
connected to a MasterConsole II channel.
On-Screen User
Interface (OSUI)
Series of Menus displayed on the monitor that can be
used, through keystrokes, to operate MasterConsole II. All
keystrokes are captured and interpreted as
MasterConsole II commands.
PowerSave Allows a properly equipped monitor to operate in low-
energy mode.
Remote Console Keyboard, monitor, and mouse plugged into the Remote
access kit.
Cat5 Remote KVM
Module
Optional Remote Unit that connects to the MasterConsole
II to provide additional access to connected computers up
to 650' away using Cat5 UTP Cable.