User`s manual

28
Glossary
Administration Menu Used to restrict access to MasterConsole II; toggle
Security ON/OFF and to change Administrator’s
Password and up to five User Passwords.
Administration Password The only Password with access to the Administration
Menu, through the Administration password prompt.
AutoScan When activated, MasterConsole II automatically cycles
through channels, displaying each computer’s video for a
specified period.
AutoSkip When activated, channel selection is restricted to active
channels.
Base Unit MasterConsole II unit to which devices (computers and /
or other MasterConsoles) are connected in a two-tier
configuration.
Channel The 25-pin connector by which a device is connected to
MasterConsole II.
Active A channel is active when a powered ON device is
connected to it.
Inactive A channel is inactive when there is no device connected
to it, or if the connected device is powered OFF.
Channel ID The specific Channel number to which a device is
connected.
Configuration One-Tier Computers are connected to a single MasterConsole II
unit.
Two-Tier A mix of devices (computers and MasterConsole units)
are connected to a base MasterConsole unit.
Configuration Menu Used to specify MasterConsole II configuration and
operation parameters.
Device A computer or a MasterConsole unit connected to a
MasterConsole II channel.
Device Field In the Configuration Menu, specifies the type of device
connected to each channel of a base MasterConsole II
unit.