User`s manual

• To change the Name of any computer connected to either the base unit or

second-tier MasterConsole, type up to eight alphanumeric characters (no

spaces).

• To change the Channel-Specific scan Rate for any highlighted channel (default is

3 seconds): Type a number from 00 to 99 (in seconds). When the AutoScan

Mode in the Configuration Menu is set to Individual, these Channel-Specific Scan

Rates are enabled. If the AutoScan mode is set to Global, the global scan rate

will be used.

4. When you move to a different page or exit this Menu, you are prompted to save your

changes. Press <Y> to save.

5. To exit the Edit Names and Scan Rate Menu: Press any Menu F key to go to

another menu, or press <Esc> to go to the Selection Menu.

Edit Names and Scan Rate

MC: MCC8 Page: 1 / 3

Ch. ID Name Scan Rate

............ ................. ....................

01 /MCC01 08

02 PC0002 03

03 Market-3 10

04 Jen 04

05 Vicki 06

06 /MCP06 05

07 PC0007 03

08 PC0008 02

............ ................. ....................

F1 F2 F3 F4 F5 F6 F7 Esc

Figure 18. Edit Names and Scan Rate Menu (Base MasterConsole II)

Edit Names and Scan Rate

MC: MCC01 Page: 2 / 3

Ch. ID Name Scan Rate

............ ................. ....................

01.01 PC0101 05

01.02 Sara 03

01.03 Sales-2 10

01.04 Bob 04

01.05 PC0105 06

01.06 PC0106 08

01.07 Market-4 03

01.08 JoePC 02

............ ................. ....................

F1 F2 F3 F4 F5 F6 F7 Esc

Figure 19. Edit Names and Scan Rate Menu (Second-Tier MCC8)