User`s manual

16
d. Repeat steps 4a through 4c to connect additional second-tier MasterConsole
units to the base MasterConsole II.
e. For second-tier units located more than 30 feet away from the base unit, see
Remote Access Using Cat5 Reach, page 25.
Connect Computers to Second-Tier MasterConsole(s)
1. Connect computers to the channels of second-tier MasterConsole(s).
• Follow Steps 3a through 3f to connect the computers to each second-tier
MasterConsole II.
• For MasterConsole P Models, follow installation instructions in the P Model
manual.
Configuring the Base MasterConsole II (Two-Tier)
The Configuration Menu is used to specify your base MasterConsole II configuration and
to set/change parameters for operation.
See Figure 14
1. Activate on-screen user interface by pressing the hot-key (<Scroll-Lock> by default)
twice rapidly.
2. Press <F4> to access the Configuration Menu.
• The Connected field displays the Channel ID and Name of the currently selected
computer.
• The Model field displays the model number of this MasterConsole unit (MCCn).
Configuration Menu
Connected: 01 PC0001
Model: MCC8 Name: MCC8
Device: . . . . . . . .
Scan: Off Set: 15 Seconds
Mode: Global
Skip: On
ID Display: 20 Seconds
Hot Key: Scroll Lock
Display Position: Menu ID
Green Mode: Off 15 Minutes
F1 F2 F3 F4 F5 F6 F7 Esc
Figure 14. Configuration Menu (Two-Tier)
3. Use the <Tab> (forward)/<Shift-Tab> (backward) keys to select the desired field and
make your change as follows: