User`s manual

Administration Menu

Security: On

Time Out: 15 Minutes

Change Passwords:

Admin User1 User2

User3 User4 User5

F1 F2 F3 F4 F5 F6 F7 Esc

Language Mode: English

Figure 10. Administration Menu

Operating MasterConsole II Using On-Screen User Interface

(One-Tier)

Selecting a Computer

1. Activate on-screen user interface by pressing the hot-key twice rapidly.

• AutoScan is suspended, if set.

• MasterConsole II front panel buttons are disabled.

• The Selection Menu is displayed. See Figure 11.

2. The Selection Menu lists channels sorted either by Channel ID or alphabetically by

Name. Default sorting is by Channel ID. Press <F12> to toggle between Channel ID

and alphabetical.

• The Selection Menu displays a maximum of eight channels at a time.

• The Status column shows each channel's activity and Channel-Specific Scan

Rate. A "+" in the first column indicates a device is connected and powered ON,

while a "-" indicates the device is powered OFF or there is no device connected.

"Snn" indicates the Channel-Specific Scan Rate of nn seconds. (default is 3

seconds).

As the computer status changes (active/inactive), the MCC updates the Status

column periodically. To enable a user to see the new status immediately, activate

the OSUI and press F8-Upgrade Computer Status. The MCC will scan the

channels and update the computer status and then return to the previous menu.