User`s manual

10
MasterConsole II is delivered with system default passwords. They are as follows:
Password
Admin Raritan
User 1 111
User 2 222
User 3 333
User 4 444
User 5 555
Turning Security on/OFF and Changing Passwords:
1. Activate On-Screen User Interface.
2. Press <F5> to access the Administration Password prompt.
3. Type in the Administration Password, then press <Enter>.
The Administration Menu will be displayed. See Figure 10.
4. Use the <Tab> (forward)/<Shift-Tab> (backward) keys to move the cursor to the
desired field and make your changes as follows:
• To turn Security ON/OFF (default is OFF): Press the <Ï>/<Ð> keys to toggle.
• To change Security activation delay time (default is 15 minutes). Move to the
Time Out field, then type a number from 01 to 99, or use the <Ï>/<Ð> keys to
specify a time interval. If the system will remains inactive (no keyboard or mouse
operation) for this time interval, the next user is required to enter a password to
access the MasterConsole II.
• To change the Administration Password: Move to Change Passwords, where
Admin will be highlighted. Press the <Enter> key and type a new password (up to
eight alphanumeric characters, no spaces). Press <Enter>. Confirm the
password by typing it again. Press <Enter>.
• To change a User Password, press the <Tab> key to highlight one of the desired
Users. Press <Enter>. Type a new password (up to eight alphanumeric
characters, no spaces). Press <Enter>. Confirm the password by typing it again.
Press <Enter>. Repeat this process for the remaining four Users, pressing the
<Tab> key to move from one User field to the next. You can specify up to five
User Passwords.
• To change the type of keyboard, press the <Tab> key to highlight Language
Mode field. Press <Ï>/<Ð> to select English, German, or French.
5. To exit the Administration Menu: Press any Menu F(function #) key to go to another
menu or press <Esc> to exit on-screen user interface and return to normal computer
operation.