User`s manual

a To change the Global Scan Rate (default is 3 seconds): Move to Set and

type a number from 01 to 99, or press the <Ï>/<Ð> keys to specify the Scan

Rate (in seconds) for Global AutoScan.

b. To change AutoScan mode (default setting is Global): Move to Mode and

press the <Ï>/<Ð> keys to toggle between Global and Individual. See page

34 for description.

• To turn AutoSkip ON/OFF (default is OFF): Move to Skip and press the

<Ï>/<Ð> keys to toggle. With AutoSkip ON, only active channels can be

selected.

• To change the ID Display time interval (default is 3 seconds): Move to ID Display

and type a number from 01 to 99, or press the <Ï>/<Ð> keys to specify the

interval (in seconds) you want the Channel ID and Name to display when each

computer is selected. Type 99 if you want the Channel ID and Name to display

continuously.

• To change the On-Screen User Interface activator (default is <Scroll Lock>):

Move to Hot Key and press the <Ï>/<Ð> keys to select the desired key. The

hot-key can only be <ScrollLock> <NumLock>, <CapsLock>, left <Shift> or left

<Alt>.

• To change the menu Display position: Move to Menu and press <Enter>. Then

press the <Ï>, <Ð>, <Í>, and <Î> keys to move the menu vertically and

horizontally to the desired position. Then press <Esc> or <Enter>.

• To change the channel ID display position: Move to ID and press <Enter>. Then

press the <Ï>, <Ð>, <Í>, and <Î> keys to move the menu vertically and

horizontally to the desired osition. Then press <Esc> or <Enter>.

• To turn PowerSave On/Off (default is OFF): Move to Green Mode and press the

<Ï>/<Ð> keys to toggle. To change the PowerSave delay time (default is 15

minutes): Move to the next field and type a number from 01 to 99, or press the

<Ï>/<Ð> keys to change the interval (in minutes) of inactivity (no keyboard or

mouse operation) after which the video signal will be cut off from the monitor.

This will allow a properly equipped monitor to enter low-energy mode.

• To select Previous Channel Toggle (default is CapsLock). This feature enables

the user to toggle between the previous and current selected channel. Press F4

to display the Configuration menu (Figure 1) and move the cursor to the Previous

Channel Key. Use the <Ï> or <Ð> keys to select the key, <caps lock>, <scroll

lock>, <num lock>, left <shift>, or left <alt> to be used. This feature enables the

user to switch back to a previous channel by pressing the selected key twice

rapidly. There is no need to activate the OSUI.

NOTE: Select a previous channel key that is not being used as the current hot

key activator.

4. To exit the Configuration Menu: Press an appropriate Menu F key to go to another

menu, or press <Esc> to exit on-screen user interface and return to normal

computer operation. Any changes made to the Configuration Menu are automatically

saved.