User guide

Compatibility with Other Raritan
Products
Appendix C
You can connect other Raritan products to the MCCAT switch, such as
MasterConsole II, which can work as the second tier, or P2CIM-SER,
which can connect an ASCII serial device to the MCCAT switch.
In This Chapter
Compatible CIMs.....................................................................................51
Compatibility with MasterConsole II ........................................................53
Compatible CIMs
In addition to MCIM-PS2 and MCIM-USB, MCCAT is also compatible with
other Raritan CIMs (see the table below).
The procedure of connecting these CIMs is the same as that of connecting
MCIM. For details, see Connecting Computers (on page 10).
CIM Connector type
P2CIM-APS2 PS-2 and HD15 (video) connectors
P2CIM-AUSB ** USB and HD15 (video) connectors
P2CIM-PS2 PS-2 and HD15 (video) connectors
P2CIM-USB USB and HD15 (video) connectors
DCIM-APS2 PS-2 and HD15 (video) connectors
DCIM-USB USB and HD15 (video) connectors
DCIM-USB G2 ** USB and HD15 (video) connectors
P2CIM-SER RS-232 (serial) and USB connectors
P2CIM-SER-EU RS-232 (serial) and USB connectors
** When connecting a P2CIM-AUSB or DCIM-USB G2 to the computer,
ensure that the slide switch on the back of the CIM is moved to P for
PC-based servers instead of S for SUN servers because MCCAT18/116
supports the PC mode but NOT the SUN mode.
Important: Although MCCAT supports the use of P2CIM-APS2, it does
NOT support the use of Pinnacle FastAction keyboard.
51