User guide

Chapter 6: Firmware Upgrade
47
d. Click the Port field and type the appropriate number of the serial
port. For example, if the MCCAT switch connects to the computer
via COM 1, type 1.
e. Ensure <Default No Encryption> is selected in the Encryption
Key field.
f. (Optional) Click Save to save the device information so next time
you don't have to specify the same information again.
3. Select the checkbox next to the MCCAT switch.
4. Click Load Hex File . The Open dialog appears.
5. Navigate to where the appropriate firmware file (*.hex) is stored,
select it and click Open.
6. Click Raritan MasterConsole to perform the upgrade.
Note: The “Check Device Information” button does NOT work for the
MCCAT switch. Therefore, never click it when the device intended to
upgrade is MCCAT.