User guide

Chapter 5: Two-Tier System

Accessing the Second-Tier Channels

Unlike the first-tier channels, there is only one way to access the

second-tier channels, that is, through the OSD. If you have properly

followed the procedure described in Setting Up a Two-Tier System (on

page 37), the second-tier channels will be displaye

d in the OSD, following

the page(s) of the first-tier channels. To access these channels, do the

following:

1. (Optional) If the OSD is not displayed on the screen, press the hot key

twice QUICKLY (default: Scroll Lock) to activate it. The Selection

Menu appears. Note that the names of all second-tier devices start

with “/” like channel numbers 3 and 6 illustrated below.

2. There are several methods to go to the second-tier channels. Do one

of the following:

 Press

or to highlight the first-tier channel where the

second-tier device connects and press Enter.

 Press the number shown in the “Key” field of the first-tier channel

where the second-tier device connects.

 Press Page Down or Page Up until you see the page where the

second-tier channel is available.