User guide
Chapter 5: Two-Tier System
41
5. Type the appropriate code that corresponds to the type of the
connected second-tier device. For example, if you connect an
MCCAT18 unit to the channel number 3 of the first-tier unit, type y in
the third character.
See the following table for all codes representing different types of
devices.
Code Device type
. computer (or server)
x MCC4
y MCCAT18, MCC8
z MCCAT116, MCC16
Note: For detailed information on other types of MasterConsole products,
please see MasterConsole II User Manual on Raritan website's Support
page (http://www.raritan.com/support/).
Default Name of the Second-Tier Device
The following default names of the second-tier devices are shown in the
channel list after assigning the device type. Note that <XX> represents the
number of the channel where the device is connected.
/MCC<XX>—This device is a MasterConsole II switch.
/MCCAT<XX>—This device is an MCCAT switch.
STEP 5: Connect Computers to the MCCAT System
You can connect computers to available channel ports of any MCCAT
switches in the two-tier system, including those of the first-tier and
second-tier MCCAT switches. For details, see Steps 2 to 4 in Connecting
Computers (on page 10).