User guide

Chapter 4: Advanced Operation and System Configuration
32
Field Available options Description
 Individual scan mode: The scan time for each
channel varies depending on the settings you
have set for each channel in the Edit Names
and Scan Rate menu.
Skip
On, Off Toggles the AutoSkip mode on or off.
If it is ON, after you quit the OSD, only active
channels can be accessed.
ID Display
01 ~ 99 (seconds) Determines the length of time for which the
accessed channel's number (ID) is displayed on
the screen when the channel is selected.
Hotkey
ScrollLock, LftAlt (left Alt),
LftSht (left Shift),
CapsLock, NumLock
Determines which hot key can activate the OSD.
The default is Scroll Lock.
Note that if you have set any hot key in the
Previous Channel Key field, the same key will
not be available in the Hotkey field.
Display Position
Menu, ID
Determines the horizontal and vertical positions
where the Menu (OSD menu) or the ID (channel
number) is displayed. To change the position, do
the following:
a. Highlight the option of which you want to
change the position.
b. Press Enter and the image of the
selected option (Menu or ID) appears on
the screen.
c. Use arrow keys (
, , , ) to move
the Menu or ID image until it reaches the
position you prefer.
d. Press Esc or Enter to save the changes.
Green Mode
On, Off Toggles the power-saving function on or off. If
setting the mode to On, the MCCAT switch will
enter the power-saving mode after no
keyboard/mouse activity is detected for a period
of time specified in the Minutes field.
Minutes
01~99 (minutes) Determines the length of time for which no
keyboard/mouse activity is detected before the
MCCAT switch enters the power-saving mode.
Previous
Channel Key
None, LftAlt (left Alt), LftSht
(left Shift), Caplck
(CapsLock), Numlck
(NumLock), Scrlck (Scroll
Lock)
Determines which hot key is used for returning to
the previously selected channel. The default is
None.
Note that the hot key which you have set in the
Hotkey field will not be available in the Previous