User guide

Chapter 4: Advanced Operation and System Configuration
28
Accessing the System in the Security Mode
After the system or the MCCAT switch enters the security mode, the
message “Security Mode Protected”appears on the screen. Do the
following to access the system:
1. Press any key and the prompt message “Password:” appears.
2. Type either the administrator (Admin) or user password and press
Enter. Unless changed, type one of the default passwords listed
below.
User type Default password
(case sensitive)
Administrator (Admin) raritan
User1 111
User2 222
User3 333
User4 444
User5 555
Video of the currently selected channel is displayed on the screen if the
password is entered correctly. Now you can activate the OSD or press the
channel button to access any channel in the system.
Changing Passwords
MCCAT provides one administrator (Admin) password and five user
passwords by default. You can access the system with these passwords
after it enters the security mode. It is strongly recommended to change the
default passwords before turning on the security feature.
1. (Optional) If the OSD is not displayed on the screen, press the hot key
twice QUICKLY (default: Scroll Lock) to activate it.
2. Press F5 and the prompt message “Admin. Password” appears on the
screen.