User guide

Chapter 4: Advanced Operation and System Configuration

The Security Feature

You can prevent unauthorized access to the system and the connected

computers by activating the security feature. When the security feature is

ON, the system will enter the security mode after the mouse and keyboard

activity is not detected for a preset period of time. Users have to enter a

password in order to access the system in the security mode.

Activating the Security Feature

1. (Optional) If the OSD is not displayed on the screen, press the hot key

twice QUICKLY (default: Scroll Lock) to activate it.

2. Press F5 and the prompt message “Admin. Password” appears on the

screen.

3. Type the Admin password (default: raritan) and press Enter. Note

that the password is case sensitive. The Administration Menu

appears.

4. Make sure the Security field is already highlighted. If not, press Tab

or Shift+Tab to highlight the field.

5. Press

or to change the option to On.

6. Press Tab to highlight the Time Out field. This field determines the

length of time for which keyboard and mouse activity can remain

inactive before the system enters the security mode.

7. Type two numeric digits or press

or to adjust the time.

8. Press Esc to quit the current menu.