User guide

Chapter 4: Advanced Operation and System Configuration

Turn off AutoScan

Activate the OSD again and press Alt+F6.

Cycling Through Active Channels Only

You can skip inactive channels through the OSD after the AutoScan

function is turned on. Therefore, only active channels are scanned.

1. (Optional) If the OSD is not displayed on the screen, press the hot key

twice QUICKLY (default: Scroll Lock) to activate it.

2. Press F7 to turn on the AutoSkip function.

3. The OSD disappears, indicating the system enters the AutoSkip

mode.

Turn off AutoSkip

Activate the OSD again and press Alt+F7.

Returning to the Previous Channel

You can quickly return to the previously selected channel, if any, by using

a hot key without triggering the OSD or looking for the corresponding

button on the front panel.

Requisite for performing this function:

You must have turned on the “Previous Channel” function in the

Configuration Menu. Otherwise, the hot key will not work. See System

Configuration (on page 30) for details.

Opera

tion:

1. You accessed a specific channel (computer).

2. Then select a different channel by using the OSD or pressing the

channel button.

3. To switch back to the channel selected in Step 1, press the hot key

twice quickly (the hot key is the one you specified for the Previous

Channel Key field in the Configuration Menu).

Now you are switched to the previously selected channel again.