User guide

Chapter 4: Advanced Operation and System Configuration

Turn off AutoScan

Press the SCAN button so the LED light is off. The system will stop at the

last scanned channel.

Cycling Through Active Channels Only

When AutoScan is on, the system cycles through all channels, including

'active' and 'inactive' ones. To shorten the scanning time, you can have the

system skip inactive channels by activating the AutoSkip function.

Turn on the AutoSkip Function:

Press the SKIP button on the front panel. The LED under the button is lit.

Turn off AutoSkip

Press the SKIP button and the LED light is off.

OSD Operation

1. (Optional) If the OSD is not displayed on the screen, press the hot key

twice QUICKLY (default: Scroll Lock) to activate it.

2. Press F6 to turn on the AutoScan function.

3. The OSD disappears, indicating the system enters the AutoScan

mode.

Starting from the currently selected channel, the system displays the video

of each channel one after another. Each channel's number and name (if

available) will pop up temporarily on the screen when the channel is

accessed.