User guide

Chapter 2: Quick Start

Changing Channel Names

By default, the connected device or computer's name is shown

“PC<XXXX>,” and a second-tier MCCAT switch's name is shown

“/MCCAT<XX>” in the On-Screen Display (OSD). <XXXX> or <XX>

indicates the channel number but may not be meaningful for you to identify

the connected device. Therefore, it is recommended to change the default

channel name(s) for better identification.

1. (Optional) If the OSD is not displayed on the screen, press the hot key

twice QUICKLY (default: Scroll Lock) to activate it. The Selection

Menu appears.

2. Press F3 to go to the Edit Names and Scan Rate menu.

3. Press the arrow keys (

, , , ), Tab or Shift+Tab to select the

channel name. The selected character blinks, indicating where the

selection is.