User guide

Chapter 2: Quick Start
14
OSD Operation
1. Press the hot key twice QUICKLY (default: Scroll Lock) to
activate the OSD.
2. The Selection Menu similar to the following image appears, with eight
channels shown on one page. Note that the default name PC<XXXX>
(<XXXX> indicates the channel number) is displayed only when the
MCCAT switch detects that a device is being connected to the
channel.
3. (Optional) Press Page Down or Page Up to switch between pages if
your MCCAT contains more than eight channels and the channel to
access is not shown on the current page.
4. Press
or to move the yellow highlight bar to the channel you
want. Or press the number shown in the “Key” field of that channel to
immediately access it.
5. Press Enter and the video of the accessed channel is displayed on
the screen.
Now you can control the computer with the keyboard and mouse
connected to the MCCAT switch.
Warning!! MCCAT does not support real-time channel detection when
channel changes occur. Therefore, if you disconnect the computer from
the channel you are accessing now and reconnect another computer to
that channel, you must activate the OSD to select the same channel
again. Otherwise, you may have mouse or keyboard input issues with
the channel being accessed.