User guide

Chapter 2: Quick Start

6. Plug one end of the MCCAT's power cord into its power socket and

the other end into the appropriate power outlet.

7. Turn on the monitor, connected computer(s), and the MCCAT switch.

Selecting a Channel

After finishing the hardware installation, try to access one or more

channels to verify the connections. Use one of the following to access

channels:

 Front panel buttons

 OSD

Note: If you establish a two-tier MCCAT system, the only way to access

the second-tier channels is through the OSD. For more information, see

Chapter 5, Two-Tier System (on page 36).

Front Panel Operation

Press the channel button whose number corresponds to the channel you

want to access. The video of the accessed channel is displayed on the

screen and you can control the computer with the keyboard and mouse

connected to the MCCAT switch.

Note: The front panel operation becomes invalid if the OSD remains

displayed on the screen. Therefore, make sure the OSD is NOT displayed

on the screen when operating with the front panel buttons.