User guide

Chapter 2: Quick Start
9
Forward Mount
To rack-mount the MCCAT switch with the front panel facing the
front of the rack
1. Let the MCCAT switch's front panel and the bracket's "ear" face
toward you.
2. Align two oval-shaped holes close to the ear of the bracket with two
threaded holes on one side of the MCCAT switch.
3. Secure the bracket to the MCCAT switch with two of the included
screws.
4. Repeat Steps 1 to 3 for securing the other bracket to the other side of
the MCCAT switch.
5. Mount the entire assembly in the rack, and secure the brackets' ears
to the rack's front rails with your own screws, bolts, cage nuts, and so
on.
Rear Mount
To rack-mount the MCCAT switch with the front panel facing the
rear of the rack
1. Let the MCCAT switch's rear panel and the bracket's "ear" face toward
you.
2. Align two oval-shaped holes far from the ear of the bracket with two
threaded holes on one side of the MCCAT switch.
3. Secure the bracket to the MCCAT switch with two of the included
screws.
4. Repeat Steps 1 to 3 for securing the other bracket to the other side of
the MCCAT switch.