Specifications

16 MASTERCONSOLE MX4 INSTALLATION AND OPERATION GUIDE
Figure 18 MX
4
Back Panel
4. Connecting a computer to the MX
4
• Using a Universal Cable Kit (CCPnnU), plug the 25-pin connector into one of the numbered channels on
the MX
4
back panel.
• Plug the cable's other connectors into the computer's keyboard, monitor, and mouse ports. Use supplied
adapters for AT-style computers if needed (Figure 17 and Figure 19).
• Power on the connected computer.
• On the Selection Menu, the line displaying the channel to which the new computer has been connected will
turn green.
• Use the <Ç> and <È> keys to select the channel, and press <Enter>.
• You will now be able to operate the computer just as if the keyboard, monitor, and mouse were connected
directly.
5. Repeat steps 2 and 4 to connect the remaining user consoles and computers to the MX
4
.
Figure 19 K/B Mouse Adapters for PS/2 to AT