Setup guide

MCCAT28/216 QSG 6
QSG-MCCAT2-0A-v2.0-E y 255-20-0004-00
the system settings in the Administration Menu, you must log in
with the administrator account.
To log in to the MCCAT system
1. The Login box appears on the screen connected to the
MCCAT device (either the MCCAT switch or user station)
after turning ON all devices in the MCCAT system.
2. Type your user name and password respectively, and
press Enter. For example, if you are the administrator, the
user name is "admin," and the default password is "raritan."
a. Type admin in the User Name field, and press Enter.
b. Type raritan in the Password field, and press Enter.
The password is case sensitive.
3. The Selection Menu appears, indicating your login is
successful.
Important:Itisstronglyrecommendedtochangethe
defaultpasswordforthesecurityofyourMCCAT
system.Formoreinformation,seeChanging
PasswordsintheUserGuide.
QS Rule
Selecting a Channel
After login, you can select any channel to view, and control the
computer connected to the channel. Depending on which set of
input/output devices (keyboard, mouse and monitor) you use,
there may be two or one method for channel selection.
If operating the input/output devices connected directly to the
MCCAT switch, you can use:
• Selection Menu of the On-Screen Display (OSD), or
• Channel buttons on the front panel
If operating the input/output devices connected to the MCCAT
user station, you can use:
• Selection Menu of the On-Screen Display (OSD)
Note: The front-panel-button operation is also NOT available
on the "second-tier" MCCAT switches in a two-tier system.
Using the Selection Menu
The first OSD menu that appears on the screen after login is
the Selection Menu. The Selection Menu does not show any
channel name by default until you assign them. To select the
channel for the first time after your login, you must use the
Selection Menu.
To select the channel in the Selection Menu
1. (Optional) Press Page Down or Page Up to go to the next or
previous page if you do not find the channel on the current
page.
2. Press Æ or Å to move the highlight bar to the channel you
want to select.
Tip: You can press the corresponding number shown in
the “No” column of the Selection Menu to immediately
highlight the channel instead of pressing the arrow keys.
3. Press Enter.
The Selection Menu disappears. The video of the accessed
computer now appears on the screen. You can control the
computer with the keyboard and mouse connected with the
MCCAT device.