User guide

Chapter 9: Security

 Lockout Period on Invalid Login (minutes): 5

3. Accept the system defaults or type your own.

1. Go to the Login Handling panel and enter a value in the User Idle

Timeout (minutes) field. This is the length of inactive time, after

which the user is timed out. Default time is 10 (minutes).

Note: If no port connections are established from CC-SG to

Dominion SX within the configured time of User Idle Timeout, service

sessions from both devices will be disconnected.

2. To enable single login only, select the Single Login per User

checkbox. Only one user can log in at a time using the same profile.

3. Select the Anonymous Port Access checkbox to turn this feature on.

An Anonymous User Group is created by default and it cannot be

deleted, even by the Administrator. It is visible in the Group List if

Anonymous Port Access is selected, but invisible in Group List if

Anonymous Port Access is deselected.

Note: See Port Configuration and Port Access Application (on

page 42) for additional information about anonymous port access.

4. Select Share in the Port Access Mode drop-down menu if port

access should be shared, allowing users to connect to the port while

another user is using it. The default value is Share. Change this to

Private if you want to keep other users from connecting to a port

while a user is using it.

Strong Password Settings

To enable strong passwords, go to the Strong Password panel and

select the requirements for a strong password. This includes maximum

and minimum length and special character requirements.